Every ENVE carbon rim is molded in Ogden, and the technician who lays up each one signs it. The wheels ENVE4,5 sells in the United States are built in the same building. The hubs inside them come from an outside factory. In January 2013 ENVE told Cycling West1,6,10 that its goal was to bring 100 percent of its component manufacturing back to Utah. Nine years later its first stock road bike, the Melee, came out of what the company called its overseas manufacturing facility. The rims never left.
Quick answers
Where are ENVE wheels made?
The carbon rims are molded in Ogden, Utah. Wheels for the United States are built there too. Wheels for European orders are finished at a distribution center in France, using Ogden rims.
Are ENVE hubs made in the USA?
ENVE says its Innerdrive hubs are designed by ENVE and made at a third party manufacturing facility. It does not say where.
Where is the ENVE Melee made?
Overseas. ENVE said at its 2022 launch that the Melee is manufactured in the company's overseas facility.
Is the ENVE Custom Road made in Utah?
Yes. ENVE has built it in Ogden since 2021, along with its one-piece bar and stem.
Who owns ENVE Composites?
PV3, a Utah private investment firm, which bought it from Amer Sports in 2024.
What ENVE makes in Ogden
Since 2016 ENVE Composites has worked out of an 80,000 square foot building in Ogden that holds its engineering and its manufacturing as well as sales and finance. When the company changed hands in April 2024, the announcement carried by Utah Business2 said ENVE designs and manufactures 100 percent of its rims, and its Custom Road bike, in that building.
Rims fill most of the floor. When The Salt Lake Tribune toured in June 2024, carbon fiber arrived in rolls and went straight into a walk-in freezer, so the resin already on the fiber would not set. The sheets are laser cut and serial numbered, and the technician who lays up each rim signs it. Rims cure for 20 to 30 minutes at 400 to 450 degrees Fahrenheit. A finishing robot is one of the few steps without a person on it. About 70 percent of the layup room had been there at least 10 years, and one employee estimated he had shaped close to 100,000 rims in 19 years.
Wheels for American customers are laced up in Ogden. Orders from Europe go to a distribution center in France, which builds the overseas wheels from Ogden rims, the Tribune reported. ENVE wheels started at around $1,100 at the time. Why the rims are molded the way they are is in Utah bike brands.

Where ENVE hubs and parts are made
Not all in Utah. ENVE's support page says its Innerdrive hubs, the ratchet hubs in its road and gravel wheels, are designed and patented by ENVE and made at a third party manufacturing facility. It does not name the country. The Tribune put it more broadly: the company makes some components overseas.
Some parts do stay home. When the Custom Road launched in 2021, Cycling West reported that its one-piece SES AR bar and stem is manufactured and assembled in Ogden, which lets ENVE set the stem length and bar width to each customer.
Where ENVE bikes are made
It depends on the bike. The Custom Road is made in Ogden, and Cycling West reported on March 27, 2021 that production had started there and bikes were shipping to select customers. Each one is built to the rider's fit, which is why ENVE said its availability would be limited.
The Melee was the answer to that. It launched on July 21, 2022 as a $5,500 chassis in seven stock sizes and one color, Damascus, and ENVE's release said it is manufactured in the company's overseas facility. VeloNews called it a departure from the made in Utah Custom Road.
The Melee is the ENVE that Alex, our editor, has ridden.
"ENVE makes a beautiful bike. They make beautiful rims. They also came out with a beautiful bike that I was so stoked about. I've ridden it. It's fast, it's beautiful, and they have this flawless design that they always come out with."
Alex, editor


Who owns ENVE
PV3, a private investment firm based in Utah. Amer Sports bought ENVE in 2016 for $50 million, Bicycle Retailer9,12 reported, and on April 30, 2024 announced it was selling the company to PV3. Cycling West reported the acquisition complete that day, and the Tribune wrote in June that ENVE was back in local hands after eight years under Amer.
The buyer was not the highest bidder, according to the Tribune, which also reported that PV3's principal, Mark Hancock, owns three ENVE bikes. The Tribune reported that PV3 would not run the company day to day. Mike Stimola, whom Amer brought on in January 2023, stayed on to run it.
How Edge Composites became ENVE
ENVE started in Ogden in 2007 as Edge Composites. Its founder, Jason Schiers, had run a machine shop in Las Vegas that made safety harnesses for Cirque du Soleil, and he learned carbon fiber on aerospace and NASCAR work before a stint at Reynolds, Bikerumor11 reported on a 2012 factory tour. The bike company began in a corner of a 5,000 square foot dune buggy shop and grew until it pushed the dune buggies out.
The name lasted three years. Edge ran into a trademark already registered in Europe, and on September 1, 2010 it became Enve, introduced at Eurobike with the same owners and staff. "We didn't consider checking for trademark registrations outside of the U.S.," Schiers told Bicycle Retailer. The company was building a 20,000 square foot plant at the time. Six years later it moved into the 80,000 square foot one where every rim is still made.
The brand in this answer


